Bathroom Fan (SN50/70/90/100)

Ventilating fan shall be Low Noise ceiling mount type for continuous run.
Fan should be ENERGY STAR rated and certified by the Home Ventilating Institute (HVI).
Evaluated by ETL and conform to both UL and cUL safety standards.

Motor/Blower:
Plug-in, permanently lubricated motor - engineered for continuous operation. More energy efficient than the minimum ENERGY STAR requirements rated for continuous run.
Power Rating shall be 120 volts and 60 Hz.
Fan shall be ETL and c-ETL listed for tub/shower enclosure when used with a GFCI branch circuit wiring.
Motor equipped with thermal cut-off fuse control.
Low RPM for quiet operation

Housing:
Rust proof paint, galvanized steel body.
Detachable 4" diameter duct.
Expandable extension bracket up to 24"
Double hanger bar system allowing for ideal positioning.
Housing Dimension: 9"x9"x5 3/4"

Grille:
Attractive design using PP material.
Torsion clips for secure hold.
Grille Dimension: 10 1/2"x10"

Typical Specifications:
Ceiling Ventilator shall have corrosion resistant galvanized steel housing with four-point mounting capability. It shall be ducted to a roof or wall cap using 4" round ductwork.
Blower assembly shall be removable, have a centrifugal type blower wheel and a permanently lubricated motor designed for continuous operation.
Non-metallic damper/duct connector shall be included.
Air delivery shall be no less than 50 (70, 90, 100) CFM and sound level no greater than 2.5(2.5, 3.0, 4.0) Sones respectively. All air and sound ratings shall be certified by HVI.
Ceiling ventilator shall be Energy Star qualified and have an energy efficient permanent split capacitor motor.